Yamaha RX-A710

AV receivers are great components to have in any home theater system because they can significantly improve the quality of media players. Yamaha has been one of the major competitors in the AV receiver market for quite a while and in response to some of the tight competition, Yamaha strived to move on ahead by unveiling their AVENTAGE AV receivers. All of the products in this lineup exceed many of the RX models. Even the Yamaha RX-A710 which is the cheapest AVENTAGE AV receiver of the bunch manages to be more expensive than every RX AV receiver except for the newly launched RX-V871. But surprisingly, the Yamaha RX-A710 has many of the features and qualities as the most expensive models which cost well over double the price.

Yamaha RX-A710

Yamaha RX-A710


This massive 28 pound machine really takes its design seriously with the front panel being made of aluminum to give the RX-A710 a very modern look. Aluminum was chosen for durability purposes as well because there are sensitive circuitry and other delicate components situated within the AV receiver. This panel effectively protects these components from external noise and other electrical energy from dimmer switches and the like.

Click here to view the back panel layout

However, this sturdy build won’t stop the Yamaha RX-A710 from vibrating especially if you crank up the volume. Vibrations can potentially damage the heat sinks and various components. The sound quality can get affected as well if the vibrations continue. Yamaha came up with a thoughtful way to prevent this by adding 5 feet instead of 4. The fifth foot is on the center of the AV receiver so the stability ends up being a lot better and more balanced. This breakthrough is known as the Anti-Resonance Technology Wedge or A.R.T.


The RX-A710 is quite basic in inputs and outputs if you compare it to some of the higher-end models like the Yamaha RX-A1010. However, the RX-A710 is still prepared to handle some pretty big configurations. This AV receiver offers 6 HDMI inputs with one of the HDMI inputs being located on the front. There is a single HDMI output so you can only plug in a single display unlike other AVENTAGE models but the RX-A710 still has complete 3D support. There are also some composite, component, digital, and analog audio inputs. But outputs exist but that is understandable for a low-priced AV receiver. With so many HDMI ports to work with, you should be able to hook up large home theater setups without problem.

Setting up the Yamaha RX-A710 is simple from start to finish because you can move on to the calibration phase once your speaker system and components are in their best positions possible for the room. The YPAO system automatically configures each of the speakers so they perform their best in the room environment. This technology works like other calibration systems as it relies on a small microphone which you need to place on the spot where listeners will most likely stay in. This technology considers several parameters including the size and distance of the speakers along with the sound pressure level. The calibration doesn’t take long and you can load the feature with ease through the advanced GUI that the RX-A710 provides.

The new GUI actually serves as one of the main highlights of the RX-A710 because it is extremely easy for people to use. In fact, there are so many ways to control this AV receiver. There is a mobile application called AV Controller which works on iOS or Android so you can use its iconic interface to manipulate other HDMI devices connected to the RX-A710. The remote control unit can also be used to sift through the on-screen menus or simply check the status of the AV receiver.

Surprisingly for an entry-level model, the Yamaha RX-A710 retains practically all of the networking capabilities so it is possible to link the receiver to a Pandora, Rhapsody, or Sirius XM account so you can enjoy your these Internet radio features as long as an Ethernet port is plugged in.


127 hours is a great Blu-ray title to test the capabilities and overall performance of the RX-A710. The results were very pleasing and surprisingly apparent just by looking at the vivid visuals. The image quality is very good and the natural elements of the movie really look rich. It also managed to maintain good deep black levels. Those that do not have a Blu-ray player to test can still notice some substantial improvements coming out of DVDs because of the upscaling technology to output DVDs to 1080p.

The audio quality of the Yamaha RX-A710 also highlighted some surprises thanks to the support of DTS-HS MA 5.1. The movie yields clear atmospheric sound effects and very clear voice dialog. Other technologies contribute to this including the Adaptive Dynamic Range Control and DSP Level less volume adjustments are necessary just to achieve clarity. The HD Audio with CINEMA DSP 3D technology also works very well with surround sound speaker configurations. When a pair of headphones is plugged in, the Silent Cinema technology can simulate surround sound surprisingly well.

It is best to get to know the standby modes that cause the RX-A710 to consume very little electricity. The HDMI Standby Through mode lets the AV receiver consume around 2 watts but still allows universal access to the HDMI components. Once those devices do not need to be controlled, the full standby can be used to minimize the power consumption to 0.3 watts.

Bottom Line

There are far too many technologies that manage to fit in an RX-A710 home theater receiver that pretty much uses the same components as other AVENTAGE models. Some of the components are actually improved versions of the RX-A700 which is more than welcome considering the same $650 launch price. It is best to see the back panel first in order to see if the limited array of ports is sufficient. Once assessed, the Yamaha RX-A710 can help save a lot of money since the RX-A810 costs about $200 more and the RX-A810 mainly emphasizes on additional HDMI ports.

Click Here for Latest Offer on Yamaha RX-A710
Enjoy Free Shipping & Secure Shopping